Modular Expansion Card

Expansion card, 1x GLAN Intel i210-IT, mPCIe, isolated, Wide Temp Features:Single-Lane (x1) PCI-Express with throughput up to 5.0/2.5GbpsFully compliant with PCI-Express Base Specification Rev. 2.0Integrated 10/100/1000 Mbps transceiverIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3z compliantIEEE 802.3x Full-Duplex flow controlComplies with EN61000-4-2(ESD) Air-15kV, Contact-8kVComplies with EN61000-4-4(EFT) 2kVComplies with EN61000-4-5 2kV Surge protection MEC-LAN-M101i is a single isolated GbE LAN module for embedded PC. The card follows the Mini PCI-e standard which is compliant with PCI Express x 1 classification and small form factor (30×50.95 mm). This board fits in any host computer that has Mini PCI-e card slots. MEC-LAN-M101i is a highly cost-effective solution to expand Gigabyte network for your computer. MEC-LAN-M101i has one Ethernet port that supports auto-negotiation 10/100/1000Mbps Ethernet connection with IEEE 802.3x flow control. MEC-LAN-M101i uses high performance, efficiency, and stability Intel I210-IT Gigabit Ethernet Controller. MEC-LAN-M101i is designed with flexibilities for many different application and accessories (daughter board, bracket, connection cable) are included in the standard package.

Expansion card, 2x RS-232, M.2 2242/2260/2280, Wide Temp Features:Single-Lane (x1) PCI-Express with throughput up to 5.0 / 2.5GbpsFully compliant with PCI-Express Base Specification Rev. 2.0Top serial transmission performance up to 921.6 Kbps baud rateFIFO 256 Bytes, 15 KV ESD protections on boardH/W, S/W automate flow control supportedEach port supports 5V or 12V power output by jumper setting MEC-COM-2012 is a serial communication card for embedded PC. The card follows the M.2 standard which is complaint with PCI Express x 1 classification and M.2 form factor. This board fits in any host computer that has M.2 slots. MEC-COM-2012 has 2 RS-232 serial ports, each individual port supports 921.6 Kbps baud rate. The combination features 15KV ESD protection, FIFO 256 Bytes, HW/SW automated flow control and extended operating temperature which enhances the board’s reliability and performance. MEC-COM-2012 is designed with flexibilities for many different applications. The power output can be configured by jumper. The accessories (bracket, connection / power input cable) are included in the standard package.

Expansion card, 2x GLAN Intel i210-IT, mPCIe, isolated, Wide Temp Features:Single-Lane (x1) PCI-Express with throughput up to 5.0/2.5GbpsFully compliant with PCI-Express Base Specification Rev. 2.0Integrated 10/100/1000Mbps transceiverIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3z compliantIEEE 802.3x Full-Duplex flow controlComplies with EN61000-4-2(ESD) Air-15kV, Contact-8kVComplies with EN61000-4-4(EFT) 2kVComplies with EN61000-4-5 2kV Surge protection MEC-LAN-M102i is a dual isolated GbE LAN module for embedded PC. The card follows the Mini PCI-e standard which is compliant with PCI Express x 1 classification and small form factor (30×50.95 mm). This board fits in any host computer that has Mini PCI-e card slots. MEC-LAN-M102i is a highly cost-effective solution to expand Gigabyte network for your computer. MEC-LAN-M102i has one Ethernet port that supports auto-negotiation 10/100/1000 Mbps Ethernet connection with IEEE 802.3x flow control. MEC-LAN-M102i uses high performance, efficiency, and stability Intel I210-IT Gigabit Ethernet Controller. MEC-LAN-M102i is designed with flexibilities for many different application and accessories (daughter board, bracket, connection cable) are included in the standard package.

Expansion card, 2x GLAN Intel i210-AT, mPCIe, isolated Features:Single-Lane (x1) PCI-Express with throughput up to 5.0 / 2.5GbpsFully compliant with PCI-Express Base Specification Rev 2.0Integrated 10/100/1000 Mbps transceiverIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3z compliantIEEE 802.3x Full-Duplex flow control MEC-LAN-M102 is an Ethernet card for embedded PC. The card follows the Mini PCI-e standard which is compliant with PCI Express x 1 classification and small form factor (30×50.95 mm). This board fits in any host computer that has mini express card slots. MEC-LAN-M102 is a highly cost-effective solution to expand Gigabyte network for your computer. MEC-LAN-M102 has two Ethernet ports that support auto-negotiation 10/100/1000 Mbps Ethernet connection with IEEE 802.3x flow control. MEC-LAN-M102 uses high performance, efficiency, and stability Intel I210-AT Gigabit Ethernet Controller. MEC-LAN-M102 is designed with flexibilities for many different application and accessories (daughter board, bracket, connection cable) are included in the standard package.

Expansion card, WIFI, mPCIe half-size, 802.11 a/b/g/n/ac, Bluetooth 4.0 Features:Realtek RTL8812AEConfiguration WLAN/ BT antenna diversity with DPDT RF switchWLAN Standard IEEE 802.11 ABGN/ACHost interface Half Mini-Card complies with PCI express 1.1 MEC-WIFI are WIFI cards for embedded PC. The cards follow the Mini PCI-e standard which is complaint with PCI Express x 1.1 classification and small form factor ( 29.85*26.65 mm). This board fits in any host computer that has MiniPCI-e card slots.

Expansion card, 4x RS-232/422/485, mPCIe, Wide Temp Features:Single-Lane (x1) PCI-Express with throughput up to 5.0 / 2.5GbpsFully compliant with PCI-Express Base Specification Rev 2.0Top serial transmission performance up to 921.6 Kbps baud rateFIFO 256 Bytes, 15 KV ESD protections on boardH/W, S/W automate flow control supportedRS-232/422/485 mode selectable by DIP switch settingEach port supports 5V or 12V power output by DIP switch setting MEC-COM-M334 is a serial communication card for embedded PC. The card follows the Mini PCI-e standard which is complaint with PCI Express x 1 classification and small form factor (30.00 x 50.95 mm). This board fits in any host computer that has Mini PCI-e card slots. MEC-COM-M334 has 4 RS-232/422/485 serial ports, each individual port supports 921.6 Kbps baud rate. The combination features 15KV ESD protection, FIFO 256 Bytes, HW/SW automated flow control and extended operating temperature which enhances the board’s reliability and performance. MEC-COM-M334 is designed with flexibilities for many different applications. The Serial RS- 232/422/485 mode and power output can be configured by DIP switches. The accessories (bracket, connection / power input cable) are included in the standard package.

Expansion card, 2x RS-232/422/485 isolated, M.2 2242/2260/2280, Wide Temp Features:Single-Lane (x1) PCI-Express with throughput up to 5.0 / 2.5GbpsFully compliant with PCI-Express Base Specification Rev. 2.0Top serial transmission performance up to 921.6 Kbps baud rateFIFO 256 Bytes, 15 KV ESD protections on boardH/W, S/W automate flow control supportedRS-232/422/485 mode selectable by DIP switch settingSupport port to computer isolation 2.5kV MEC-COM-2032i is a serial communication card for embedded PC. The card follows the M.2 standard which is complaint with PCI Express x 1 classification and M.2 form factor. This board fits in any host computer that has M.2 slots. MEC-COM-2032i has 2 RS-232/422/485 serial ports, each individual port supports 921.6 Kbps baud rate. The combination features 15KV ESD protection, FIFO 256 Bytes, HW/SW automated flow control and extended operating temperature which enhances the board’s reliability and performance. MEC-COM-2032i is designed with flexibilities for many different applications. The serial RS-232/422/485 mode can be configured by DIP switches. The accessories (bracket, connection / cable) are included in the standard package.

Expansion card, WIFI, M.2 2230, 802.11 a/b/g/n/ac, Bluetooth 4.2 Features:Form factor: NGFF M.2 2230 typeIEEE 802.11a/b/g/n/ac draft 2.0 compatible WLANWLAN supports 2.4GHz and 5GHz channel2T2R MIMO technology for extended reception robustness and exceptional throughputBluetooth: BT 2.1/3.0/4.0/4.1/4.2

Expansion card, 2x USB3.2 Gen 1, mPCIe Features:Single-Lane (x1) PCI-Express with throughput up to 5.0/2.5GbpsFully compliant with PCI-Express Base Specification Rev 2.0Two USB3.0 Super-Speed portsSupport simultaneous operation of multiple USB 1.1, USB 2.0, and USB 3.0 devicesUSB data transfer rate of 1.5/12/480/5000 MbpsUniversal Serial Bus 3.0 specification Revision 1.0 compliantSupport Hot-Swap function MEC-USB-M102 is a USB 3.0 card for embedded PC. The card follows the Mini PCI-e standard which is complaint with PCI Express x 1 classification and small form factor (30.00 x 50.95 mm). This board fits in any host computer that has Mini PCI-e card slots. MEC-USB-M102 provides data transfer rate of 1.5/12/480/5000 Mbps while connecting to USB 3.0 compliant peripherals. MEC-USB-M102 supports Hot-Swap function which allow devices to be plugged in or removed while bus is active. MEC-USB-M102 is designed with flexibilities for many different applications. The accessories (daughter board, bracket, connection / power input cable) are included in the standard package.

Expansion card, 2x USB3.2 Gen1, mPCIe Features:Single-Lane (x1) PCI-Express with throughput up to 5.0/2.5GbpsFully compliant with PCI-Express Base Specification Rev. 2.0Two USB3.0 Super-Speed portsSupport simultaneous operation of multiple USB 1.1, USB 2.0, and USB 3.0 devicesUSB data transfer rate of 1.5/12/480/5000 MbpsUniversal Serial Bus 3.0 specification Revision 1.0 compliantSupport Hot-Swap function MEC-USB-2002 is a USB 3.0 card for embedded PC. The card follows the M.2 standard which is complaint with PCI Express x 1 classification and M.2 form factor. This board fits in any host computer that has M.2 slots. MEC-USB-2002 provides data transfer rate of 1.5/12/480/5000 Mbps while connecting to USB 3.0 compliant peripherals. MEC-USB-2002 supports Hot-Swap and Plug-n-Play functions which allow devices to be plugged in or removed while bus is active. MEC-USB-2002 is designed with flexibilities for many different applications. The accessories (bracket, connection / power input cable) are included in the standard package.

Expansion card, GLAN Intel i210-IT, M.2 2242/2260/2280, isolated, Wide Temp Features: Single-Lane (x1) PCI-Express with throughput up to 5.0/2.5GbpsFully compliant with PCI-Express Base Specification Rev. 2.0Integrated 10/100/1000 Mbps transceiverIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3z compliantIEEE 802.3x Full-Duplex flow controlComplies with EN61000-4-2(ESD) Air-15kV, Contact-8kVComplies with EN61000-4-4(EFT) 2kVComplies with EN61000-4-5 2kV Surge protection MEC-LAN-2001i is a single isolated GbE LAN module for embedded PC. The card follows the M.2 standard which is compliant with PCI Express x 1 classification and M.2 form factor. This board fits in any host computer that has M.2 slots. MEC-LAN-2001i is a highly cost-effective solution to expand Gigabyte network for your computer. MEC-LAN-2001i has one Ethernet port that supports auto-negotiation 10/100/1000Mbps Ethernet connection with IEEE 802.3x flow control. MEC-LAN-2001i uses high performance, efficiency, and stability Intel I210-IT Gigabit Ethernet Controller. MEC-LAN-2001i is designed with flexibilities for many different application and accessories (daughter board, bracket, connection cable) are included in the standard package.

Expansion card, WIFI, M.2 2230, 802.11 a/b/g/n/ac, Bluetooth 5.0 Features:Form factor: NGFF M.2 2230 typeIEEE 802.11a/b/g/n/ac draft 2.0 compatible WLANWLAN supports 2.4GHz and 5GHz channel2T2R MIMO technology for extended reception robustness and exceptional throughputBluetooth: BT 2.1/3.0/4.0/4.1/4.2/5.0Max. PHY data rate: 866.7Mpbs using 80MHz bandwidthI/O: WLAN: PCIe1.1. BT: USB 2.02 x 50 Ohm RF connectors for 2.4G/5G diversity data transmission MEC-WIFI-2632B-30 is a highly integrated single-chip that support 2-stream 802.11ac solutions with Multi-user MIMO (Multiple-Input , Multiple-Output) with Wireless LAN (WLAN) PCI Express network interface controller with integrated Bluetooth Smart Ready USB interface controller. It combines a WLAN MAC, a 2T2R capable WLAN baseband, and RF in s single chip. MEC-WIFI-2632B-30 provides a complete solution for a high- performance integrated wireless and Bluetooth device.

PCIe Expansion card, 4x PoE+ Intel i210 Features:Quad-Lane (x4) PCI-Express with throughout up to 5.0/2.5GbpsFully compliant with PCI-Express Base Specification Rev. 2.0Integrated 10/100/1000Mbps transceiverSupport four isolated GbE LAN portsFour independent PSE channelsSupport Wake-on-LANComplies with IEEE 802.3atSupport power input 12V ~ 24V from 6pin PCIE-ATX MEC-LAN-P004P is a quad isolated GbE LAN module for embedded PC. The card follows the PCI-e standard which is compliant with PCI Express x 4 classification. This board fits in any host computer that has PCI-e card slots. MEC-LAN-P004P is a highly cost-effective solution to expand Gigabit network for your computer. External Power over Ethernet Plus (PoE+) module ensures reliable power and data transfer and supplies more power than standard PoE. MEC-LAN-P004P has four Ethernet ports that support auto-negotiation 10/100/1000Mbps Ethernet connection with IEEE 802.3x flow control. MEC-LAN-P004P uses high performance, efficiency, and stability Intel I210 Gigabit Ethernet Controller. MEC-LAN-P004P is designed with flexibilities for many different application and accessories (heat sink, bracket) are included in the standard package.

Expansion card, 2x SATA III 6 Gb/s, mPCIe Features:Single-Lane (x1) PCI-Express with throughput up to 5.0/2.5GbpsFully compliant with PCI-Express Base Specification Rev. 2.0Two Serial ATA III 6Gb/s ports (Compatible with Serial ATA I and II)Transfer rate of 1.5Gbps, 3.0Gbps, and 6.0GbpsIDE/AHCI mode supportedSATA Port Multiplier and Hot-Swap supported MEC-SAT-M002 is a serial ATA III card for embedded PC. The card follows the Mini PCI-e standard which is complaint with PCI Express x 1 classification and small form factor (30.00 x 50.95 mm). This board fits in any host computer that has Mini PCI-e card slots. MEC-SAT-M002 has great compatibilities with all types of Serial ATA devices, including hard drive, solid state drive, and optical drive. MEC-SAT-M002 comes with 2 ports of newest Serial ATA III interfaces that support the application of the industry’s newest and fastest 6Gb/s hard drives while providing backward compatibility to SATA 1.5Gb/s and 3Gb/s hard drives. MEC-SAT-M002 follows the standard of PCI-Express 2.0 and SATA revision 3.0, and supports IDE/AHCI mode and Hot-Swap function. MEC-SAT-M002 is tested to be compatible with various Windows Operation Systems. The SATA connection cable is included in the standard package

Expansion card, 4x RS-232/422/485, mPCIe, Wide Temp Features:Single-Lane (x1) PCI-Express with throughput up to 5.0 / 2.5GbpsFully compliant with PCI-Express Base Specification Rev 2.0Top serial transmission performance up to 921.6 Kbps baud rateFIFO 256 Bytes, 15 KV ESD protections on boardH/W, S/W automate flow control supportedEach port supports 5V or 12V power output by DIP switch setting MEC-COM-M212 is a serial communication card for embedded PC. The card follows the Mini PCI-e standard which is complaint with PCI Express x 1 classification and small form factor (30.00 x 50.95 mm). This board fits in any host computer that has Mini PCI-e card slots. MEC-COM-M212 has 2 RS-232 serial ports, each individual port supports 921.6 Kbps baud rate. The combination features 15KV ESD protection, FIFO 256 Bytes, HW/SW automated flow control and extended operating temperature which enhances the board’s reliability and performance. MEC-COM-M212 is designed with flexibilities for many different applications. The power output can be configured by DIP switch. The accessories (bracket, connection / power input cable) are included in the standard package.

Expansion card, WIFI, mPCIe half-size, 802.11 b/g/n Features:Realtek RTL8188EE MAC/BBP/RF1T1R Mode with a 150Mbps Tx/Rx PHY Rate20MHz/40MHz BandwidthIEEE 802.11b/g/n compatible WLANIEEE 802.11e QoS Enhancement(WMM)Complies with PCIe 1.1 MEC-WIFI are WIFI cards for embedded PC. The cards follow the Mini PCI-e standard which is complaint with PCI Express x 1.1 classification and small form factor ( 29.85*26.65 mm). This board fits in any host computer that has MiniPCI-e card slots.